ACUIX
TM
ES Installation and Configuration Guide
Document 800-01949 Rev D
75
05/09
Working with Passwords and PINS
Note
A password refers to any alphanumeric name (for example,
Dome1234
)
whereas a PIN is a four digit number only (for example,
1234
).
Enabling the User or Privacy Zone Login PIN
Note
Even if the User or Privacy Zone Login PIN is disabled, you still require a
password to enter the Admin Login/Passwords menu.
1.
Ensure you have manual control of the ACUIX ES.
2.
Press
75
>
Preset
> enter the password (1000 = default).
3.
Select
1 User Login PIN
>
Enabled
or
Disabled
.
Changing a 4-Digit User or Privacy Zone Login PIN
1.
Press
75
>
Preset
.
2.
Enter the
4-digit PIN
(default = 1000).
3.
Select
2 Change PIN
> Enter a new PIN.
4.
Re-enter the PIN to verify
as above.
The message
PIN changed
displays and you return to the
Password Settings
menu.
•
If you enter the wrong 4-digit number, the message
Invalid PIN, try again
displays and the dome returns to the
Enter PIN
screen.
•
Also see
Recovering an Encrypted User or Privacy Zone Login PIN
.
Recovering an Encrypted User or Privacy Zone Login PIN
1.
Press
75
>
Preset
.
An encrypted PIN number displays on the monitor.
2.
Write down the number.
3.
Contact Honeywell Technical Support to recover the actual PIN.
Summary of Contents for ACUIX ES
