6
UNPACKING
Remove all packing materials and accessories. Examine the chiller for any damage such as
dents or broken door. Do not install if chiller is damaged.
Allow the chiller to stand upright for approximately 2 hours before connecting the power
source.
If discarding an old chiller, please see “Disposal Instructions” on page 3.
LOCATION OF THE CHILLER
Find a suitable area for your wine chiller. Do not place the chiller outside, or any other
place where the chiller will be exposed to water or other harsh weather conditions. The
chiller must not be placed in environments where the ambient temperature drops
below 65°F (18.3°C) degrees or goes above 85°F (29.4°C) degrees. The ideal
ambient temperature is 72°F (22.2°C).
SETTING UP THE WINE CHILLER
INSTALLATION INSTRUCTIONS
The wine chiller is a free standing appliance, but can
be installed next to counters and walls – but must not
be placed under a counter.
For the chiller to function properly, it is important to
have a clearance of at least 10 centimeters from the
back of the chiller to any surface next to it. Also, there
needs to be a clearance of at least 5 centimeters from
the sides of the chiller next to it.
Top of
the chiller
back
front
wall
10 cm
5 cm
NOTE: THE SPACING IS NECESSARY FOR PROPER VENTILATION
PLACING THE WIRE RACKS IN THE CHILLER
Carefully place the racks in the appropriate grooves. Notice the racks slide in and out
easily, so do not pull them out completely when in use.
