Honeywell 8732001, Installation & Operation Manual

Page: 8 / 60

Page 6
11. Installing Batteries
a. Insert 4 AA high quality Alkaline batteries into the Battery Compartment in the
direction noted +/- on the Compartment. The Lock will beep 2 times, the keypad
will illuminate blue, and the Honeywell button will flash green twice to signify that
it has received power (Figure 11a).
b. Slide the Battery Cover down into the track on the Interior Assembly to cover
the batteries (Figure 11b).
12. Testing Lock
With the Door Open
a. Test the Lock using the Interior Knob. The Latch should move smoothly.
b. Test the lock using the Keypad. To lock press and then press “ 1234”
to unlock.
INSTALLING INTERIOR ASSEMBLY (CONT.)
Override
Access Key
Exterior Assembly
Interior Assembly
Interior
Knob
Battery
Cover
Light Indicator
Keypad
NOTE: Do not touch the Keypad until the blue light turns off.
Do not use rechargeable batteries or non-alkaline batteries.
Figure 11a-b
INSTALLATION OVERVIEW
Strike Plate
Battery Cover
Interior Assembly
Keys
Exterior
Assembly
Rubber Gasket
Tailpiece
Mounting Plate
Latch
5/16” (8mm) screws
Optional
3/4” (19mm) screw
3/4” (19mm) screws
7/8” (22mm) screws
1” (25mm) Screw