Appendix B – Printer Control Codes
80
6824 Mobile Full Page Printer User Manual
Define User-Defined Characters
Description:
Redefine characters in the currently selected mode. For each character defined, you
must supply 12 bytes of data.
s1
is the first byte that describes the character format:
•
Bits 0 to 3 represent the end position in the grid.
•
Bits 4 to 6 represent the start position in the grid.
•
Bit 7 determines whether the character uses the top eight pins or the bottom eight
pins of the printhead. If bit 7 = 0, the top eight pins are used. If bit 7 = 1, the bottom
eight pins are used. The start and end positions are ignored during character
imaging, but must be accurate to redefine the character code.
k1
is the character code of the first character to redefine.
k2
is the character code of the last character to redefine.
•
Range for
k1
and
k2
is 0 to 255, as any character in that range can be redefined.
•
k1
can equal
k2
if only one character is redefined.
d1 ... d11
is the data that comprises the dot image pattern of the defined character.
Decimal:
27 38 0
k1 k2 s1 d1 ... d11
Hex:
1B 26 00
k1k2 s1 d1 ... d11
ASCII:
ESC “&”
k1 k2 s1 d1 ... d11
Notes:
User-defined characters can be used only in draft mode.
When Expand Printable Code Area is active, and the user-defined character set is
selected by Select User-Defined Character Set, then codes less than 20h and greater
than 7Fh can be defined for use and are printable.
When Enable Printing of Codes 128-159 is active, and the user-defined character set is
selected by Select User-Defined Character Set, then codes between 80h and 9Fh can
be defined for use and are printable.
Select User-Defined Character Set
Description:
Select a user-defined character set.
Decimal:
27 37 1
Hex:
1B 25 01
ASCII:
ESC “%” (1)
Select Default Character Set
Description:
Enables the default character set if a user-defined set was previously selected.
Decimal:
27 37 0
Hex:
1B 25 00
ASCII:
ESC “%” (0)*
Summary of Contents for 6824
