Honeywell 6824, User Manual

Page: 65 / 98

Appendix A – Specifications and Command Lists
6824 Mobile Full Page Printer User Manual 55
•
Once the last page of the fanfold paper stack is in the printer, and the
printhead has advanced past this Paper End Detection line, printing is no
longer reliable.
•
When the bottom end of the last page has advanced through the printer, past
the spring plate along the front of the platen, the paper should not reverse
back through the printer, because the printer could jam and cause paper feed
problems.
Escape Sequence Descriptions
This section lists the supported escape sequences and includes a brief
description of each.
Escape Sequences and Descriptions
ESC Description
ESC SO Select double-wide mode (one line only)
ESC SI Select compressed mode
ESC US (0) Select top-down printing
ESC US (1) Select bottom-up printing
ESC SP n Define intercharacter space
ESC “!” n Master select
ESC “$” n1 n2 Set print position (absolute)
ESC “%” (0) Select default character set
ESC “%” (1) Select user-defined character set
ESC “&” NUL k1 k2 s1 d1 ...
d11 Define user-defined characters
ESC “*” m n1 n2 Select graphics mode
ESC “+” n d1 ... dn Print character graphics
ESC “-” 0* Cancel underline mode
ESC “-” 1* Select underline mode
ESC “/” c Select vertical tab channel
ESC “0” Select 1/8-inch line spacing
ESC “1” Select 7/72-inch line spacing
ESC “2” Select 1/6-inch line spacing
ESC “3” n Select n/216-inch line spacing
ESC “4” Select italic mode
ESC “5” Cancel italic mode
ESC “6” Enable printing of codes 128–159
ESC “7” Disable printing of codes 128–159
ESC “<” Select unidirectional printing (one line only)
ESC “:” NUL NUL NUL Copy ROM to RAM
ESC “?” s n Reassign graphics mode
ESC “@” Perform master reset