background image

5

REMOVABLE SHELF

Models 5103S, 5103, 5104, 5107S, 5107, 5108, 5112DOJ, 5113 
5103GS, 5103G, 5104G, 5107GS, 5107G, 5108G, 5112GDOJ, 5113G
If your safe is equipped with a removable shelf, it can easily be removed to accommodate the storage 
of taller or larger items.
1. Empty shelf of all contents and remove any carpeting
2. Remove by lifting and tilting to side to fit through door opening.

DO NOT discard shelf. It is recommended that you keep it for future needs.

CARE AND MAINTENANCE

When properly maintained, your safe will continue to operate for many years. In order to ensure 
optimum performance of your safe, please follow these simple precautions:

CLEAN HANDS

 - Never attempt to operate the digital keypad if your hands have excessive dirt, debris 

or liquids on them.

CLEAN SAFE

 – To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g., 

window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use 
abrasive cleansers on the safe or digital keypad.

MOISTURE

 – We recommend that you place delicate items such as pictures or intricate jewelry into an 

air-tight container before storing them in your safe. Avoid placing your safe in areas of high humidity. 
For optimum performance, the safe should be opened and aired out for at least 20 minutes every two 
weeks.  
For future reference, store this Operation and Installation Guide in a secure area away from the safe. 

DO NOT DISCARD!

REPLACING BATTERIES

You may check the battery power at any time by pressing the “LOCK” key just once. The LED display 

will show one of the following messages:

: Battery power is good (Figure 1).

: Battery power is low and batteries should be replaced (Figure 2).

 
Weak or dead batteries should be replaced immediately and all 4 batteries should be changed.
It is NOT RECOMMENDED to use Non-alkaline or rechargeable batteries. Remember to always 
remove the batteries from the safe if not using it for an extended period of time.

NOTE: The active code will not be erased if the batteries become weak or are removed.

4

1

2

ABC

DEF

JKL

GHI

PRS

TUV

WXY

MNO

3

5

6

4

1

2

ABC

DEF

JKL

GHI

PRS

TUV

WXY

MNO

3

5

6

Figure 1

Figure 2

Summary of Contents for 5103-5108













Reviews: