Mounting Instructions
Honeywell Security
Novar GmbH
Johannes-Mauthe-Straße 14
D-72458 Albstadt
www.honeywell.com/security/de
FM Frame for TC plus
Item no. 013051
suitable in combination with CBFM
013046/47/48 for:
- LED Keypad for MB-Secure
- LED/LCD Keypad for MB-Secure
- Touch operating module
TouchCenter plus
locking-lug
1. Making recesses - see photo and drawing.
2. Installation of the CBFM box on hand of
this installation instructions.
3. Insert and tight TC plus or keypad
according corresponding mounting
instructions.
4. Finally, clip on the FM Frame. To do
this, for example attach the frame to
the bottom, then pull it apart slightly
from the side and snap it in at the
sides, finally locking the upper locking
lugs over the inserted TC plus or
keypad and engage in the back.
5. If necessary, e.g. in the case of wall
unevenness or inadequate clamping
strength, the frame can also be moun-
ted individually on the wall by means
of several adhesive dots,e.g.Silicone.
Mounting
In order to be able to clamp the FM Frame on the Touch-
Center plus or on a MB-Secure kepad correctly, the Case
Back Flush Mount (CBFM) must be prepared accordingly.
To be sure that the locking lugs correctly engage, small re-
cesses must be manually attached to the CBFM box. For
the position and size of the recess, please refer to the
drawing.
There are a total of 6 recesses with the dimensions 22 mm x
2.5 - 3 mm required. The recesses can be made very easily
e.g. by means of file.
28
69
28
28
28
69
22
22
22
22
22
22
3
3
3
3
3
3
recess
recess
View from behind
locking-lug
recess
