12
Mounting and Connection Instructions TouchCenter Keypad BUS-2
6. Overview
6.1 Front view
6.2 Rear view
6.3 Mounting plate
Lights up: Intrusion alarm
Flashes: Tamper- or hold-up alarm
Lights up: Unit is ready
Lights up: General system fault of the
central control panel
Flashes: Mains fault of the central
control panel
For installation according to VdS, the mounting plate with screwable locking mechanism of
the VdS-Kit (Item no. 012578) must be used. Please note the mounting hints of the
documentation of the VdS-Kit.
LED red
LED green
LED yellow
Shield connection for
tracer wire at the
mounting plate
Fixing holes
Fixing hole for
tear-off protection.
After mounting please
cutt off the plastic web
with wire cutter!
Fixing holes
Installation options for
the mounting plate, when
surface mounted over
a mounting box
(example).
Buzzer
Fixing holes for
mounting plate
Fixing holes for
mounting plate
Tamper and tear off
protection switch
Cable entry by
surface mount
Connection
BUS-2
Strain relief
Screw for locking mechanism
