17
If activated during installation,
the furnace filter reminder alerts
you when it is time to replace
your filter.
Press
RESET
after changing the
filter, to restart the timer.
To reset the reminder interval
before it expires:
1. Press
MORE
, then
NEXT
.
2. Press
RESET
.
3. Press
DONE
to save and exit.
Filter reminder
Reset
Schedule
Clock & Mode
M27535
System
Fan Auto
Set To
Heat On
Change Filter
AM
70
70
6:01
Heat
Reset
Next
Done
M27536
60
Days
Special features
Smart Response
®
Technology:
This feature allows the thermostat to
“learn” how long the furnace and air conditioner take to reach programmed
temperature settings, so the temperature is reached at the time you set. For
example: Set the Wake time to 6 am, and the temperature to 70°. The heat
will come on before 6 am, so the temperature is 70° by the time you wake at
6. The message “Recovery” is displayed when the system is activated before a
scheduled time period.
Compressor Protection:
This feature forces the compressor to wait a few
minutes before restarting, to prevent equipment damage. During the wait
time, the message “Wait” is displayed on screen.
Auto Changeover:
This feature is used in climates where both air
conditioning and heating are used on the same day. When the system is set
to Auto, the thermostat automatically selects heating or cooling depending
on the indoor temperature. Heat and cool settings must be at least 3 degrees
apart. The thermostat will automatically adjust settings to maintain this
3-degree separation.
