PROSiXPIR
Wireless Passive Infrared Motion Sensor
Installation Instructions
This wireless passive infrared motion sensor is intended for use with Honeywell Home controls that support PROSiX™
series devices.
Mounting Location
•
The optimal range is
obtained at a mounting
height of 7’ 6” (2.3 m).
•
Allow a clear line-of-sight to
all areas to protect.
•
Do not directly face
windows.
•
Avoid close proximity to
moving machinery,
fluorescent lights, and
heating/cooling sources.
•
For use in applications with
pets up to 80 pounds (36
kilograms).
In Applications with Animals
:
•
Mount with the center of the device at 7.5 feet (2.3m)
•
Mount where pet cannot come within 6 feet (1.8m) of the sensor by climbing on furniture,
stairs, boxes or other objects.
•
Test each installation to determine exact level of animal immunity; levels vary based on
environmental differences and the amount of heat radiated by an animal.
Mounting Options
After enrolling, verify adequate
signal strength by conducting a
sensor test (see the
controller’s instructions) with
the device in its intended
mounting location. Adjust the
device location and orientation
as necessary
.
The PROSIXPIR can be
mounted on the wall or in
corners:
•
[A]
= Wall mounting holes.
•
[B]
= Corner mounting
holes.
• The rear tamper plate
MUST be mounted to a
stud, solid wood, or with a
robust wall anchor.
