Honeywell Home Ademco Vista Series, User Manual

Page: 7 / 64

3
System Overview (Continued)
Function Keys
•
The “A,” “B,” “C,” and “D” keys can be programmed to perform various functions.
•
Functions include: activate a panic alarm, arm the system, provide step arming, switch lights on/off,
send a message to a pager, display Time/Date, and start a programmed Macro sequence.
Paging Feature
•
If programmed, the system can automatically send certain system condition messages to up to four
(VISTA-20P Series) or two (VISTA-15P Series) pagers.
• The pager displays code numbers identifying the type of condition that has occurred.
Scheduling
•
Your system can be programmed to automatically perform certain functions (e.g., arm the system) at
a predetermined time each day.
Using the Voice Message Center (if Voice Keypad is installed)
Voice keypads feature a voice message
center that lets you record and playback
one message.
•
The message can be up to 2.5-minutes
long
• The message remains in memory until a
new message is recorded.
• The volume control is adjustable.
• Refer to the procedures below when
using the Message Center functions.
Message Center Functions
To… Press these keys… Notes…
record a
message
#
FUNCTION
+
0
VOICE
+
1 OFF
RECORD
The red MESSAGE LED lights.
Message remains in memory until a
new message is recorded.
end
recording
1
OFF
RECORD
The red MESSAGE LED flashes,
indicating message waiting.
play a
message
#
FUNCTION
+
0
VOICE
+
3 STAY
PLAY
The recorded message plays and the
red MESSAGE LED turns off.
adjust the
volume
#
FUNCTION
+
0
VOICE
+
2 AWAY
VOLUME
, then press
volume key [3] ↑ (up) or [6] ↓ (down)
Adjusting message volume also
adjusts status volume. Volume cannot
be adjusted while playing.