Honeywell Home Ademco Vista Series, User Manual

Page: 34 / 64

30
Accessing Other Partitions (Vista-20P)
About Accessing Partitions (VISTA-20P)
(GOTO Command and Multi-Partition Arming)
Each keypad is assigned a default partition for display purposes, and will show only that partition's
information.
•
If the user is authorized, a keypad in one partition can be used to perform system functions in the
other partition by using the GOTO command. Refer to the GOTO section.
•
If the user is authorized, that user can arm other partitions. Refer to the Multi-Partition Arming
section.
The following table shows the relationship of the keypads in each partition when system is armed and
disarmed.
PARTITION 1 PARTITION 2 COMMON ZONE
(LOBBY, etc.)
Arming
State
Keypad
Status
Arming
State
Keypad
Status
Arming
State
Keypad
Status
Condition 1

Disarmed Partition 1
Only
Disarmed Partition 2
Only
Disarmed Common Zone
Only
Condition 2

Disarmed Partition 1 and
Common Zone
Armed Partition 2
Only
Disarmed Common Zone
Only
Condition 3

Armed Partition 1
Only
Disarmed Partition 2 and
Common Zone
Disarmed Common Zone
Only
Condition 4

Armed Partition 1
Only
Armed Partition 2
Only
Armed Common Zone
Only
When both partitions are disarmed, the keypad in each partition displays zone status for its partition
only. The common zone keypad shows the status in that zone only. See Condition 1 above.
When partition 1 is disarmed and partition 2 is armed, the keypad in partition 1 shows the status of
partition 1 and the common zone. Partition 2 will display the status of partition 2 only. See Condition 2
above.
When partition 1 is armed and partition 2 is disarmed, the keypad in partition 1 shows the status of
partition 1 only . Partition 2 will display the status of partition 2 and the common zone . See Condition 3
above.
As long as any one of the two partitions is disarmed, the common zone will always be disarmed.
The common zone will be armed only when both partition 1 and 2 are armed. See Condition 4
above.