−2−
−3−
2. HANDLING OF CABLES
●
Be sure to use the specified power supply cable and fuse.
It cause to heating or firing.
●
Do not leave the power plug as it is while it is pulled out of the unit.
If the plug gets wet, it causes to heating or firing due to short circuited.
●
Be sure to wire in order to prevent the cables from interfering to operate boat.
If feet of crews or operating equipments are caught in cables, it causes to the
accident.
※
Do not put the heavy objects on cables or do not bend cables excessively.
●
Do not disassemble or modify the cables.
It causes to heating, firing or electric shock.
●
Do not use the damaged cables.
It causes to firing or electric shock.
●
Do not pull the cable when you pull out the plug.
It causes to firing or electric shock because the cable is broken.
※
When you pull out the plug, be sure to have it in your hand and pull it.
3. HANDLING OF TRANSDUCER AND WATER TEMPERATURE SENSOR
●
Work on the board is too unstable and risky.
Installation and maintenance of transducer and water temperature sensor
should be done after you land and fix the boat.
Unless you keep it, human damage resulting in death or serious wound will occur.
※
Please ask to shop for installation.
●
Installation of the transducer or water temperature sensor inside the hull with adhesive
should be done while you ventilate well inside the boat.
Volatile gas from solvent or etc. causes to toxic symptoms.
●
When you work using electric tools, please keep your hands dry.
If you hands are wet, it causes to electric shock.
●
When you pull out or insert the plug of transducer or water temperature sensor, please be
sure to turn the power switch off.
It causes to electric shock.
●
Perfect waterproof treatment should be done when you install the transducer or water
temperature sensor through the hull.
If waterproof is not sufficient, it causes to marine disaster because water comes in.
※
Please ask to shop for installation.
�������
�������
������
�������
