Hondex HE-7300 Operation Manual Download

Page: 6 / 41

−1−

CAUTION ON SAFETY (PLEASE MAKE SURE TO READ.)

This section explains the important cautions in order to prevent the person who will use our product
or other persons from human damage or damage to their property.

1. HANDLING OF MAIN UNIT

●

High voltage is applied to the inside of unit.

No one besides authorized technician should disassemble or modify it.
Unless you keep it, the accident resulting in the electric shock will occur.

※

Please be sure to consult with dealer when you want to repair.

●

Do not install it in simple method.

It causes to the accident like human damage.

※

Please be sure to install correctly according to descriptions on "Installation of the unit" of

this manual.

●

Do not use the information displayed on the screen of unit for navigation directly. It causes

to the marine disaster.

※

Please be sure to use the official marine charts for navigation judgment.

●

Do not put the power on in the presence of flammable materials.

It causes to firing.

●

Do not use the power supply besides the specified ones.

It causes to heating or firing.

��

Summary of Contents for HE-7300










































Search results

Summary of Contents for HE-7300

Reviews:

Related manuals for HE-7300

Brands by name

Popular brands

Hondex HE-7300, Operation Manual

Search results

Summary of Contents for HE-7300

Reviews:

Related manuals for HE-7300

Brands by name

Popular brands