#
Changing the Answer Back Buzzer
Sound Pattern
You can select 3 buzzer sound patterns.
a
Turn the ignition switch to the (Off) position.
b
Repeat this step 3 times as follows:
Turn the ignition switch from the (Off)
position to the (On) position and press ANSWER
BACK button on remote transmitter 3 times.
Then turn the ignition switch from the (On)
position to the (Off) position within 5 seconds.
u
You need to operate this process from
the (Off) position to the (On)
position within 5 seconds.
c
Turn and keep the ignition switch to the
(On) position. Press the ANSWER BACK
button to select among 3 buzzer sound
patterns.
d
Turn the ignition switch to the (Off)
position to finish setting the buzzer sound
patterns.
To complete your setting, you need to go
through step 3 within 60 seconds.
Make sure that LED on the remote
transmitter is green before setting the buzzer
sound patterns. Because if it is red, you
cannot set the buzzer sound patterns.
20180319161948_32K0FE000_eng_BOOK Page 37 Monday, March 19 2018 16:27:28 JST
Operation Guide
34
Answer Back System
(Continued)
LED
OFF
ANSWER BACK button
ON
