#
Cancelling the Alarm System
Press the UNSET button or turn the ignition
switch to the (On) position.
When UNSET button is pressed, the alarm
indicator blinks, and the alarm sounds for 2
times.
The buzzer sound can be cancelled using
temporary silence mode.
#
Temporary Silence Mode
#
Adjusting the Sensitivity of Alarm
System
You can select 3 sensitivity levels of alarm
system.
a
Turn the ignition switch to the (Off) position.
b
Repeat this step 3 times as follows:
Turn the ignition switch from the (Off)
position to the (On) position and press SET
button on remote transmitter 2 times.
Then turn the ignition switch from the (On)
position to the (Off) position within 5 seconds.
u
You need to operate this process from
the (Off) position to the (On)
position within 5 seconds.
20180319161948_32K0FE000_eng_BOOK Page 32 Monday, March 19 2018 16:27:28 JST
Operation Guide
29
Continued
UNSET button
ON
LED
OFF
SET button
ON
