Tyre Puncture
u
Removing Wheels
81
Tr
ou
ble
sho
otin
g
9.
Remove the rear axle shaft, rear axle
washer, side collars and rear wheel from
the swingarm.
Installation
1.
To install the rear wheel, reverse the
removal procedure.
2.
Reassemble the brake stopper arm and
tighten the brake stopper arm nut.
3.
Adjust the drive chain.
2
P. 65
4.
Adjust the rear brake pedal freeplay.
2
P. 59
5.
Tighten the rear axle nut.
6.
After installing the wheel, apply the brake
pedal several times, then check if the wheel
rotates freely. Recheck the wheel if the
brake drags or if the wheel does not rotate
freely.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
A used cotter pin may not effectively secure a
fastener. Always replace a used cotter pin with
a new one.
Torque:
21.5 N·m (2.2 kgf·m, 16 lbf·ft)
Drive chain
adjusting nut
Drive chain
lock nut
Rear axle
washer
Rear axle shaft
Drive chain
Torque:
59 N·m (6.0 kgf·m, 44 lbf·ft)
18 CFT125MS MR MRC (PH)-32KPYA100.book Page 81 Friday, June 9, 2017 6:03 PM
Summary of Contents for XRM125 2018
Page 1: ......
Page 110: ...18 CFT125MS MR MRC PH 32KPYA100 book Page 106 Friday June 9 2017 6 03 PM...
Page 111: ......
