−
If a torque wrench was not used for
installation, see your Honda dealer as soon
as possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Installation Notes:
Adjust the brake (page
) and drive
chain (pages
).
Apply the brake several times and check
for free wheel rotation after the brake
pedal is released.
Remove the rear wheel f rom the
motorcycle.
Remove the rear axle shaft ( ), drive
chain adjusters ( ) and side collar, then
remove the drive chain ( ) from the
driven sprocket by pushing the rear
wheel forward.
Tighten the rear axle nut to the specified
torque:
Reverse the removal procedure.
6.
7.
7
8
9
16
74
76
83
93 N·m (9.5 kgf·m , 69 lbf·ft)
10/03/11 17:15:26 32KRHA00_093
