Honda WB20XT2, Manual

Page: 28 / 132

3-3
dummyhead dummyhead
WB20XT2•WB30XT2 MAINTENANCE
ENGINE OIL LEVEL CHECK/CHANGE
CHECK
Place the water pump on a level surface.
Remove the oil filler cap (1) and verify the oil level is at
the top of the oil filler neck (2).
If the oil level is low, fill with recommended oil to the top
of the oil filler neck (page 3-3).
Check that the oil filler packing (3) is in good condition;
replace it if necessary.
Install and tighten the oil filler cap securely.
CHANGE
Place the water pump on a level surface and place a
suitable container under the drain plug bolt (1).
Remove the oil filler cap (2), drain plug bolt, and drain
plug washer (3), and drain the oil into a suitable
container.
Please dispose of used oil in a manner that is
compatible with the environment. We suggest you take
used oil in a sealed container to your local recycling
center or service station for reclamation. Do not throw it
in the trash, pour it on the ground, or pour it down a
drain.
Install the drain plug bolt with a new drain plug washer
and tighten it to the specified torque.
Add the specified amount of recommended oil into the
engine.
After adding the oil, check the oil level.
Check that the oil filler packing (4) is in good condition,
replace it if necessary.
Install and tighten the oil filler cap securely.
Make sure there are no oil leaks.
(1)
(3)
(2)
Used engine oil contains substances that have
been identified as carcinogenic. If repeatedly left in
contact with the skin for prolonged periods, it may
cause skin cancer. Wash your hands thoroughly
with soap and water as soon as possible after
contact with used engine oil.
TORQUE: 18 N·m (1.8 kgf·m, 13 lbf·ft)
ENGINE OIL CAPACITY:
WB20XT2: 0.56 liter (0.59 US qt, 0.49 Imp qt)
WB30XT2: 0.58 liter (0.61 US qt, 0.51 Imp qt)
RECOMMENDED OIL:
SAE 10W-30 API service classification SJ or later
SAE VISCOSITY GRADES
AMBIENT TEMPERATURE
(2)
(1)
(4)
(3)