Honda VFR800 2005 Owner'S Manual Download Page 198 | Manualshive

Page: 198 / 269

background image

Riding your motorcycle with a
temporary tire repair can be risky.
If the temporary repair fails, you
can crash and be seriously injured
or killed.

If you must ride with a temporary
tire repair, ride slowly and
carefully and do not exceed 30
mph (50 km/h) until the tire is
permanently repaired or replaced.

189

Types of Temporary Repairs

If You Have a Flat Tire

Taking Care of the Unexpected

Due to the uncertainty of any temporary
repair, you should ride slowly (not over
30 mph, 50 km/h) and carefully
(preferably without a passenger or cargo)
until the tire is replaced or permanently

repaired. Stop frequently and check the air
pressure. If the tire is losing pressure, it
may be unsafe to continue riding. As the
tire gets low, it will affect the handling of
your motorcycle (especially with a
passenger and cargo) and it may overheat
and blow out.

The following types of temporary repairs
generally require a source of air to inflate
the tire. Possible sources include CO
cartridges or cans of compressed air
designed to inflate a tire.

2

04/07/02 14:35:39 31MCW630_198

«
...
196
197
198
199
200
...
»

Summary of Contents for VFR800 2005














































































































































































































































































Reviews:

No comments

Related manuals for VFR800 2005

Brand: Free Spirits Pages: 32

Brand: Öhlins Pages: 8

prodrive SUR 3A00

Brand: Öhlins Pages: 4

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 2

Brand: Öhlins Pages: 8

Brand: Öhlins Pages: 4

Brand: Regal Raptor Pages: 48

Brand: Can-Am Pages: 196

Brand: TREND Pages: 38

Brand: B&G electronics Pages: 3

Brand: Yamaha Pages: 96

Brand: Yamaha Pages: 110

Tenere 700 2021

Brand: Yamaha Pages: 112

Tenere 700 2023

Brand: Yamaha Pages: 114

Super Tenere ES 2023

Brand: Yamaha Pages: 132

Tenere 700 2020

Brand: Yamaha Pages: 472

Brand: Yamaha Pages: 94

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands