Honda TRX420FM1 4 x 4, Owner'S Manual

Page: 151 / 272

Servicing Your Honda
143
Rear Final Gear Oil
6. Slowly fill the rear final gear with the recommended oil until oil
start to flow out of the oil level check hole (4). Allow oil to settle
for 2 – 3 minutes before moving to next step to prevent overfilling.
85 cm 3 (2.9 US oz , 3.0 lmp oz)
7. Coat a new O-ring with grease and install it into the fill cap
groove and tighten it to the specified torque:
12 N·m (1.2 kgf·m , 9 lbf·ft)
8. Install the oil level check bolt with a new sealing washer and
tighten it to the specified torque:
12 N·m (1.2 kgf·m , 9 lbf·ft)
9. Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 212).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
(4)
(3)
(3) oil level check bolt
(4) oil level check hole
REAR
14 TRX420TM1 FM1 FM2-32HR36000.book 143 ページ ２０１３年８月２７日 火曜日 午後７時３７分