3.
Place your motorcycle on its centre stand
on a firm, level surface.
4.
Place a drain pan under the drain bolt.
5.
Remove the oil fill cap/dipstick, drain bolt
and sealing washer to drain the oil.
u
Discard the oil at an approved
recycling centre.
6.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
Torque
: 24 N·m (2.4 kgf·m, 18 lbf·ft)
7.
Fill the crankcase with the recommended
P. 97) and install the oil fill
cap/dipstick.
Required oil
When changing oil:
0.8 L (0.8 US qt, 0.7 Imp qt)
8.
9.
Check that there are no oil leaks.
Engine Oil
u
Changing Engine Oil
Maintenance
56
Sealing washer
Drain bolt
