Honda Sedan CIVIC 2022, Manual

Page: 478 / 701

Continued
477
uu Honda Sensing u Road Departure Mitigation System
Driving
When you turn the Road Departure Mitigation
system on and off, do the following.
1. Press the safety support switch.
2. Roll the right selector wheel to the
symbol and push it.
u A message appears on the driver
information interface when the system
turns on or off.
u A tick mark appears in the box and the
colour of the
symbol changes to
green when the system is on. The tick
mark disappears and the colour of the
symbol changes to grey when the
system is off.
The Road Departure Mitigation system is
turned on every time you start the engine,
even if you turned it off the last time you
drove the vehicle.
■
Road Departure Mitigation system On and Off
1 Road Departure Mitigation system On and Off
You can also select the safety support content from
the driver information interface.
2 Driver Information Interface Right Side
Area
P. 138
The adaptive cruise control (ACC), safety support,
vehicle stability assist (VSA) system, and low tyre
pressure/deflation warning system indicators may
come on in amber along with a message in the gauge
when you set the power mode to ON after
reconnecting the battery.
Drive a short distance at more than 20 km/h
(12 mph). Each indicator should go off. If any do not,
have your vehicle checked by a dealer.
a
Safety Support Switch
b
Right Selector Wheel
23 CIVIC TYPE R JSS (KE KG)-32T406000_01.book 477 ページ ２０２２年７月１１日 月曜日 午前７時２０分