SAFETY
RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
(Safety Rules continued from previous page)
tractor engine
off,
remove key and lower
Operate
PTO
at 2,000
maximum.
Do
not operate PTO during transport.
Make sure area behind you is clear before
operating in reverse.
Do
not operate on steep slopes.
Do
not stop, start or change directions suddenly
on slopes.
Use extreme care and reduce ground speed on
slopes
and rough terrain.
Watch for hidden hazards on the terrain during
operation.
Stop mower and tractor immediately upon
striking an obstruction. Turn
off
engine, remove
key, inspect and repair any damage before
resuming operation.
Block mower securely before working under-
neath.
Disengage power to mower, lower to ground,
stop engine, set parking brake and remove key
before dismounting tractor.
mower to
before performing-any service
or
maintenance.
mower securely
working under-
neath.
Keep all persons away from operator control
area while performing adjustments, service or
maintenance.
Make certain all movement of mower compo-
nents has stopped before opening blade access
cover.
Frequently check blades. They should be sharp,
free of nicks and cracks and securely fastened.
Your dealer can supply genuine replacement
blades. Substitute blades may not meet
original equipment specifications and may be
dangerous.
Periodically tighten all bolts, nuts and screws
and
check that all cotter pins are properly
installed to ensure mower is
in
a
safe condition.
Ensure all safety decals are installed and in
good condition.
Ensure shields and guards are properly
MAINTENANCE SAFETY
installed and in good condition.
Always wear relatively tight and belted clothing
to avoid entanglement in moving parts. Wear
STORAGE
sturdy, rough-soled work shoes and protective
equipment for eyes, hands, hearing and head.
Block mower securely for storage.
NOTES
SR
F-7756 (1
0-89)
5
Summary of Contents for RM752A
