Braking
Slow down or stop your vehicle and keep it from moving when parked.
n
Foot Brake
Press the brake pedal to slow down or
stop your vehicle from moving.
Your vehicle is equipped with disc
brakes at all four wheels. A vacuum
power assist helps reduce the effort
needed on the brake pedal. The brake
assist system increases the stopping
force when you depress the brake
pedal hard in an emergency situation.
The anti-lock brake system (ABS) helps
you retain steering control when braking very hard.
n
Parking Brake
Keep the vehicle from moving when it is
parked.
To apply: Press the parking brake with
your foot.
To release: Press the brake pedal, then
press the parking brake until it
releases.
n
Brake Assist System
Designed to assist the driver by generating greater braking force when you
depress the brake pedal hard during emergency braking.
DRIVING
138 |
Press the brake pedal firmly for more powerful braking. When brake assist
operates, the pedal may wiggle slightly and an operating noise may be
heard. This is normal. Keep holding the brake pedal firmly down.
n
Anti-Lock Brake System (ABS)
During hard or emergency braking, the system rapidly pumps the brakes to
prevent wheel lockup and help you maintain steering control. You should
never pump the brake pedal. Let the ABS work for you by always keeping
firm, steady pressure on the brake pedal.
The electronic brake distribution (EBD) system, which is part of the ABS,
also balances the front-to-rear braking distribution according to vehicle
loading.
When ABS activates, you may notice vibrations through the brake pedal or
the vehicle body, the brake pedal depressing further than usual, or hear a
motor noise from the engine compartment. These are all normal.
The ABS may not function correctly if you use an incorrect tire type and
size.
Intelligent Traction Management System
*1
The Intelligent Traction Management optimizes vehicle performance to help you
drive on various surfaces. The system has available modes to select from:
Normal, Snow, Mud
*1
, and Sand
*1
. Press the mode button to select the
appropriate mode. The mode you select appears on the driver information
interface. When the vehicle is turned off and restarted, Intelligent Traction
Management mode will revert to Normal.
*1 - If equipped
DRIVING
| 139