8 of 8
AII 27857 (0408)
© 2004 American Honda Motor Co., Inc - All Rights Reserved.
CENTER PANEL
SELF-TAPPING
SCREWS
HEATER
CONTROL
PANEL
KNOB
To reinstall the
knobs, align the flat
surface on the rod
with the flat surface
on the knob.
CENTER
PANEL
VEHICLE HARNESS
CONNECTORS (5)
BOLT
(reused)
ANTENNA
LEAD
20. Reinstall the heater control panel and knobs on the
center panel.
21. Plug in the five vehicle harness connectors, then
plug the antenna lead into the rear of the audio
unit.
22. Reinstall the center panel with the two bolts.
23. Reconnect the negative cable to the battery.
24. Enter the anti-theft code, and reset the customer’s
radio station presets.
25. Reset the clock.
26. Check operation of the CD or cassette player
according to the Owner’s Manual.
27. Reinstall all removed parts. Check that all clips
and fasteners are installed securely.
28. Place the Owner’s Manual for the CD player or the
cassette player in the glove box.
29. Test the operation of the accessory socket/
cigarette lighter.
NOTE: Whenever the battery is disconnected, the
driver's window AUTO function is disabled.
30. Start the engine. Push down on the driver's window
switch until the window is fully open.
31. Pull up on the driver's window switch to close the
window completely, then hold the switch for 2
seconds or more.
32. Lower and raise the driver's window to check
operation of the driver's window AUTO function.
33. Do the ECM/PCM idle learn procedure.
-
Make sure all electrical items are turned off.
-
Start the engine. Hold the engine speed at
3,000 rpm with no load (in Park or Neutral) until
the radiator fan comes on.
-
Let the engine idle for about 5 minutes with
the throttle fully closed and with all electrical
items off.
NOTE: If the radiator fan comes on during this
step, the time it operates must not be included
in the 5 minutes.
