Honda Monkey 2021 Manual Download

Page: 15 / 106

Do not pull a trailer with, or attach a sidecar to,

your vehicle. Your vehicle was not designed for

these attachments, and their use can seriously

impair your vehicle's handling.

Loading

●

Carrying extra weight affects your vehicle's

handling, braking and stability.

Always ride at a safe speed for the load you

are carrying.

●

Avoid carrying an excessive load and keep

within specified load limits.

Maximum weight capacity

P. 100

●

Tie all luggage securely, evenly balanced

and close to the center of the vehicle.

●

Do not place objects near the lights or the

muffler.

WARNING

Overloading, improper loading or

carrying a passenger can cause a crash

and you can be seriously hurt or killed.

Follow all load limits and other loading

guidelines in this manual.

Loading

Vehicle Safety

Summary of Contents for Monkey 2021











































































































Search results

Summary of Contents for Monkey 2021

Reviews:

Related manuals for Monkey 2021

Brands by name

Popular brands

Honda Monkey 2021, Manual

Search results

Summary of Contents for Monkey 2021

Reviews:

Related manuals for Monkey 2021

Brands by name

Popular brands