manualshive.com logo in svg

Honda Monkey 2021, Manual, Page: 10 / 106

Share
Download
Honda Monkey 2021 Manual Download Page 10

Safety Precautions

●

Ride cautiously and keep your hands on the

handlebar and feet on the footpegs.

●

Always consider the safety of other drivers

and riders.

Protective Apparel

Make sure that you are wearing an approved

helmet, eye protection, and high-visibility

protective clothing. Avoid wearing loose clothes

that could get caught on any part of the vehicle.

Ride defensively in response to weather and

road conditions.

#

Helmet

Should be safety-standard certified, high-

visibility, and correct size for your head

●

Must fit comfortably but securely, with the

chin strap fastened.

●

Face shield with unobstructed field of vision

or other approved eye protection

Look for a DOT (Department of Transportation)

certification label on any helmet you buy.

3

WARNING

Not wearing a helmet increases the

chance of serious injury or death in a

crash.

Make sure that you always wear an

approved helmet and protective

apparel.

Safety Precautions

Vehicle Safety

8

Summary of Contents for Monkey 2021











































































































Reviews:

No comments