17-11
3) Move the shift arm to the “N” (Neutral) position. Remove
the 12 mm snap ring and the 12 mm washer from the shift
shaft B.
[1]
THROTTLE PLATE
[3]
SHIFT LINK BRACKET
ASSEMBLY
6 x 18 (2)
[4]
LINK PIN
[5]
SHIFT ARM
[2]
12 mm WASHER
[3]
SHIFT ARM
[Move to “N”
(Neutral) position.]
[1]
12 mm SNAP
RING
[2]
THROTTLE ROD
2. SHIFT LINK BRACKET/NEUTRAL SWITCH
a. REMOVAL
Remove the following parts.
– Engine cover (P. 4-2)
– Front separate cover (P. 4-7)
– L./R. engine under cover (P. 4-9)
– Remote control cable/grommet (P. 17-2)
1) Remove the throttle rod linkage pivot from the throttle plate.
2) Remove the two 6 x 18 mm flange bolts from the shift link bracket assembly.
Remove the link pin of the shift link bracket assembly from the shift arm, and remove the shift link bracket assembly.