background image

1 EN

2018 - Honda France Manufacturing S.A.S. - Pôle 45 - Rue des Châtaigniers

45140 ORMES - FRANCE - All rights reserved

3RVK8730

HRX476C2

00X3R-VK8-7300

Printed in France

OWNER’S MANUAL

Original instructions

HRX476C

Pedestrian-controlled lawnmower

FOREWORD

You have just purchased a Honda pedestrian-controlled
lawnmower and we thank you for your confidence in us.
This manual has been written to familiarize you with your
lawnmower, to enable you to use it in the best possible conditions
and to carry out its maintenance.
Our aim is to make you benefit to the full from technological
advances, from new equipment and materials and from our
experience. This is why we regularly make improvements to our
models. Thus, the specifications and information contained in this
manual may be modified without prior notice and without obligation
to update it.
If you have a problem, or if you have any questions concerning the
lawnmower, contact your supplying dealer or authorized Honda
dealer.
Keep this manual handy so you can refer it at any time. If you sell
the lawnmower, be sure that the manual accompanies it.
We recommend that you read the guarantee policy to fully
understand your rights and responsibilities. The guarantee policy is
a separate document provided by your dealer.
No reproduction, even partial, may be made of this publication
without prior written authorisation.

SAFETY INSTRUCTIONS

For your own safety and operating comfort, it is highly 
recommended that you read this manual in full.
Pay attention to these symbols and their meaning:

Indicates a high risk of severe personal injury or death if
instructions are not followed.

CAUTION:

• Indicates a possibility of personal injury or equipment damage if

instructions are not followed.

NOTE:

 Source of useful information.

DESCRIPTION OF THE CODES USED IN THIS 

MANUAL

The model of your machine is indicated on its "identification label",
by a series of letters and figures (

see page 4

).

CONTENTS

Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1
Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2
Safety stickers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
Identification of machine . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
General description   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
Preparation and checks before use  . . . . . . . . . . . . . . . . . .  5
Selecting the cutting mode (HYE, VKE, VYE types) . . . . . .  8
Starting and stopping the engine  . . . . . . . . . . . . . . . . . . . .  9
Operating hints and tips  . . . . . . . . . . . . . . . . . . . . . . . . . . .  9
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  12
Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  17
Transport. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  18
Useful information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  19
Technical specifications  . . . . . . . . . . . . . . . . . . . . . . . . . .  20
Major Honda distributor addresses . . . . . . . . . . . . . . . . . .  21
“EC Declaration of Conformity” CONTENT OUTLINE  . . .  22

HRX476C

H

Y

E

V

K

E

V

Y

E

Q

Y

E

J

Hydrostatic drive Selfpropelled . . . . . . . . . . . . . .
Self-propelled with variable speed transmission . .
Self-propelled with gearbox and rear roller . . . . .

● ●

Cutting-means brake. . . . . . . . . . . . . . . . . . . . . . 
Rotostop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 

Write down your machine's serial number here

Write down your machine's model here

3RVK87300.book  Page 1  Wednesday, August 8, 2018  11:26 AM

Summary of Contents for HRX476C

























Reviews: