Honda HRM300, Manual, Page: 16 / 324

2-7
dummyhead dummyhead
TECHNICAL FEATURES
MOVING TO THE MOWING ZONE
Under the programmed timing and requirements below, the lawnmower will move away from the docking station and will run along
the boundary wire and eventually enter the mowing zone.
1. Moving direction (From the docking station, clockwise or anti-clockwise)
2. Moving distance from the docking station along the boundary wire (0 - 250m)
3. Exit angle from the boundary wire (10° - 170°)
MOWING PATTERNS
The lawnmower has the three mowing patterns and follows one of them under the requirements.
ACW CW
10° - 170°
0 - 250m
DOCKING STATION
BOUNDARY WIRE
LAWNMOWER
RANDOM MODE:
With this setting, when the
lawnmower detects the boundary
wire, it turns at a wide angle.This is
the most effective for large open
area of grass. For normal operation,
use this setting.
DIRECTIONAL MODE:
With this setting, when the
lawnmower detects the boundary
wire, it turns at a narrow angle. This
is used for mowing narrow areas. MIX MODE =
DIRECTIONAL MODE:
With this setting, the lawnmower
alternates between the Random
mowing pattern and the Directional
mowing pattern at regular intervals.
This is used for mowing complex
areas (lots of obstacles).
+ =