To lower the head restraint: Push it
down while pressing the release
button.
n
Removing and Reinstalling the Head Restraints
Head restraints can be removed for cleaning or repair.
To remove the
head restraint:
Pull the restraint up as far as it will go. Then push the
release button(s), and pull the restraint up and out.
To reinstall a
head restraint:
Insert the legs back in place, then adjust the head
restraint to an appropriate height while pressing the
release button(s). Pull up on the restraint to make sure it
is locked in position.
Failure to reinstall, or correctly reinstall, the head restraints can result in
severe injury during a crash.
Always replace the head restraints before driving.
Adjusting the Rear Seats
Pull the lever on the right to change the
angle of the right half of the seat-back, and
left for the left half.
n
Folding Up the Rear Seats
Separately lift up the left and right halves of the rear seat cushions to make
room for cargo area.
1. Make sure the seat belt buckles are in their loops on the seat.
VEHICLE CONTROLS
44 |
2. Pull up the rear seat cushion.
3. Fold the seat leg down while pushing the seat cushion firmly against the
seat-back to lock it.
n
Folding Down the Rear Seats
Separately fold down the left and right halves of the rear seat to make room
for cargo.
To fold down the seat:
1. Store the center seat belt.
2. Insert the latch plate into the slot on
the side of the anchor buckle.
3. Retract the seat belt into the holder
on the ceiling.
4. Lower the head restraint to its
lowest position.
5. Pull the release lever and fold down
the seat-back.
To return the seat to the original position, pull up the seat-back in the
upright position.
Floor Mats
The driver's floor mat hooksfront and second row passenger's floor mats hook
over the floor anchors, which keep the mat from sliding forward. To remove a
mat for cleaning, turn the anchor knobs to the unlock position. When
reinstalling, turn the knobs to the lock position.
VEHICLE CONTROLS
| 45
