Honda HR-V 2018, Manual

Page: 83 / 637

uu Child Safety u Safety of Infants and Small Children
82
Safe Driving
1. Make sure to lock the seat-back in the
upright position.
2.
Lower the head restraint to its lowest
position.
3. Place the child restraint system on the
vehicle seat.
4. Route the seat belt through the child
restraint system according to the child
restraint system manufacturer’s
instructions, and insert the latch plate into
the buckle.
u Insert the latch plate fully until it clicks.
5. Slowly pull the shoulder part of the belt all
the way out until it stops. This activates
the lockable retractor.
6. Push down the tab. Route the shoulder
part of the belt into the slit at the side of
the restraint.
■
Installing a Child Restraint System with a Lap/Shoulder Seat
Belt
1 Installing a Child Restraint System with a Lap/Shoulder Seat Belt
To check if the lap/shoulder belt is equipped with the
lockable retractor, pull the shoulder part of the lap/
shoulder belt all the way out, let the belt retract
slowly, then pull the belt again gently. If the belt is
locked, the belt is equipped with the lockable
retractor.
The seat belt with a lockable retractor has a label as
shown in the image.
Except Australian and New Zealand models
with 1.8 L engine
Lap/shoulder seat belt with lockable retractor
18 HR-V_VEZEL JSS (KB KZ KU)-42T7AL300.book 82 ページ ２０１８年７月１３日 金曜日 午後１時４６分