Swift Chassis DB-1 & DB-6
L15A7 Engine Installation Manual
20
8/2010
Oil System
Layout all the hose and fittings before
assembly to understand how the
hoses are to be placed.
NOTE:
If you are cutting the braided
hose to length and installing the
fittings yourself be sure you are
familiar with the proper procedures. If
not done correctly you could cause
damage or harm to yourself or others.
The oil feed for both chassis is on the
lower right side of the oil pan. This is
an AN-10 fitting.
There is an in line filter included in the
kit. This should be incorporated into
the oil feed line. Be sure it is installed
in the correct direction.
The oil return line is a AN-12 at the
bottom of the scavenge pump.
Route the return line up between the
engine and bell housing.
In-line Filter
