4
© Honda Access Europe NV. 2008
REAR DOOR
Installing the Clip
1.
Open the left rear door.
2.
Check the positions where the clip are installed
and clean the surfaces with the cleaner provided
from the kit.
5.
Remove the adhesive backing from each clip.
6.
Align the edge of the clip with the mark on the door
sash, and attach the clip on the door sash as
shown.
•
Be careful in the attachment direction of four
clips.
•
Hold the adhesive tape of the clip back side
firmly against the door sash for 15 seconds
after attaching the clip.
•
Erase the marks put with the felt- tip pen.
3.
Measure each clip installation position to the
dimensions shown.
4.
Mark with a felt-tip pen the position of the
measured dimension of the door sash.
7.
Repeat the procedure to install the clip on the right
side.
8313020R
4 CLIP INSTALLATION
POSITIONS
• Clean the surface with
a cleaner.
LEFT REAR DOOR
8313041R
CLIP
CLIP
CLIP
Align the edge of the
clip with the mark
made in the step 4.
Align with the
end of the
radius.
4 ADHESIVE
BACKINGS
• Remove.
DOOR
GLASS
<SECTION VIEW>
LARGE
TAB
SMALL
TAB
MARK
MARK
CLIP
MARK
8313031R
80 mm
(3.1 in.)
Make marks with
felt-tip pen as
shown.
30 mm
(1.2 in.)
30 mm
(1.2 in.)
80 mm
(3.1 in.)
DOOR SASH
CLIP INSTALLATION
POSITION
www.auto-sonnenschutz.ch
