Honda GOLDWING GL1800 Owner'S Manual Download Page 63

Page: 63 / 296

CALL button

trunk release button

Cargo Compartment

Before Riding

Call Mode

To open the trunk, push and hold the trunk release button for approximately
one second.

The call mode is provided to let you locate your motorcycle when it is parked in
a large lot.

Push and hold the CALL button, the horn will sound and the turn signal lights
will blink two times.

When the ignition switch is in the ON or ACC position:

You can lock and unlock the compartments.
The trunk release button will not operate.
The call mode will not operate.

０８／０７／１５１０：００：４３３１ＭＣＡ６８０００６４

Summary of Contents for GOLDWING GL1800









































































































































































































































































































Search results

Summary of Contents for GOLDWING GL1800

Reviews:

Brands by name

Popular brands

Honda GOLDWING GL1800, Owner'S Manual

Search results

Summary of Contents for GOLDWING GL1800

Reviews:

Brands by name

Popular brands