Honda GOLDWING GL1800, Owner'S Manual

Page: 48 / 296

42
Headlight Beam Adjustment Knob
Rear Suspension Spring Pre-load Adjustment Switch
Ventilation Controls
Windscreen Height Adjustment
Controls & Features
Instruments & Controls
Rear Suspension Spring Pre-load
Adjustment,
The adjustment knob is used to raise or lower the height of the headlight beam.
You may need to adjust the headlight if you change to a lighter or heavier load
than you normally carry on your motorcycle.
If you carry a heavier or lighter than normal load, you may need to adjust your
headlight beam so you can better see the road ahead and don’t blind oncoming
drivers. Obey local laws and regulations concerning headlight adjustment.
To operate, start the engine.
To lower the beam, turn the headlight beam adjustment knob counterclockwise.
To raise the beam, turn the knob clockwise.
The rear suspension spring pre-load adjustment switch is used to adjust the rear
suspension to suit your load and riding conditions. For instructions on when and
how to adjust the rear suspension, see
page .
The windscreen height adjustment levers are used to raise or lower your
windscreen to suit your riding preference. For instructions, see page
.
The windscreen ventilation louver is used to direct the flow of fresh air
(page
).
The side ventilation louvers and foot warmer ventilation louvers are used to
direct the flow of warm air (pages
, ).
63
181
64
65 66
０８／０７／１５ ０９：５８：２９ ３１ＭＣＡ６８０ ００４９