If the “–” Indicator is Blinking in the Gear Position Window While Riding
If the “–” indicator is blinking while riding, you
may have a serious problem with the Dual
Clutch Transmission system.
Park your vehicle in a safe place and have
your vehicle inspected by dealer immediately.
It may be possible to ride your vehicle by
following the steps below.
1.
Turn the electrical system off.
2.
Turn the electrical system on and start the
engine.
If you cannot start the engine:
Turn the electrical system off and move the
vehicle back and forth slightly (to disengage
the gears).
Turn the electrical system on again and start
the engine.
If you still cannot start the engine:
Start the engine while applying the front or
rear brake lever.
If you can shift from N to D mode:
When a gear position is shown in the gear
position indicator, you can ride in that gear.
Take your vehicle to your dealer riding at a
safe speed.
If you can't shift from N to D mode and the “–”
indicator is blinking:
Damage is preventing you from riding. Have
your vehicle inspected by your dealer
immediately.
20201009081441_32MKV6000_eng_BOOK Page 167 Friday, October 09 2020 08:19:30 JST
Troubleshooting
164
