Continued
233
uu
If a Tire Goes Flat
u
Temporarily Repairing a Flat Tire
Han
d
lin
g the U
n
expected
13.
Apply the wheel label to the flat surface of
the wheel.
u
The wheel surface must be clean to
ensure the label adheres properly.
1.
Apply the speed limit label to the location
as shown.
2.
Drive the vehicle for about five minutes.
u
Do not exceed 50 mph (80 km/h).
3.
Stop the vehicle in a safe place.
Wheel Label
■
Distributing the Sealant in the Tire
1
Distributing the Sealant in the Tire
Stop and recheck the air pressure after every five
minutes of driving as necessary until you reach the
nearest service station where you should have the tire
permanently repaired or replaced.
Speed Limit Label
14 FIT EV-31TX96100.book 233 ページ 2013年6月6日 木曜日 午後2時33分