Honda FF500, Owner'S Manual

Page: 55 / 282

52
Rotary installation:
1. Apply grease to the key and set it on the key groove on the rotary shaft.
2. Install the inner rotary by aligning the key groove of the inner rotary with the
key on the rotary shaft with ‘‘R’’ (right rotary) mark or ‘‘L’’ (left rotary) mark facing
outside as shown.
3. Install the spring washer and rotary setting bolt, and tighten the rotary setting
bolt securely.
Make sure that the rotary setting bolt is seated to the spring washer securely.
RIGHT INNER ROTARY
FRONT
KEY
LEFT INNER ROTARY
SPRING
WASHER
ROTARY
SETTING
BOLT
ROTARY
SETTING
BOLT
’’L’’ MARK
’’R’’ MARK
RIGHT INNER ROTARY
(Viewed from right side) LEFT INNER ROTARY
(Viewed from left side)
36V246400_EN.book 52 ページ ２０２２年１月２７日 木曜日 午後５時３９分