15
CONTROLS & FEATURES
AC Circuit Protectors
The AC circuit protectors will automatically switch to OFF if there is a
short circuit or a significant overload of the generator at the 120 V 20 A
receptacle or 120 V 30 A locking plug receptacle. If an AC circuit
protector switches OFF automatically, check that the appliance is
working properly and does not exceed the rated load capacity of the
circuit before resetting the AC circuit protector ON.
DC Receptacle
The DC receptacle should ONLY be used for charging 12-volt
automotive type batteries. The DC charging output is not regulated.
DC Circuit Protector
The DC circuit protector automatically shuts off the DC battery
charging circuit when the DC charging circuit is overloaded, when
there is a problem with the battery, or when the connections between
the battery and the generator are improper. However, the DC circuit
protector does not prevent overcharging.
AC CIRCUIT PROTECTOR
for Receptacle (1)
AC CIRCUIT PROTECTOR
for Receptacle (2)
(2) 120 V 30 A
(1) 120 V 20 A
AC CIRCUIT PROTECTOR
ON
OFF
PUSH
DC CIRCUIT
PROTECTOR
OFF
ON
PUSH
DC RECEPTACLE
31ZT76331.book Page 15 Friday, February 23, 2018 2:59 PM
