
33
OPERATION
AC PARALLEL OPERATION
Both types of EU2200i generators (Standard and Companion) can be
connected to each other to increase the available power using a
parallel cable kit (optional equipment, see page 77).
Before connecting an appliance to either generator, make sure that
the appliance is in good working order and that its electrical rating
does not exceed that of the receptacle.
Most motorized appliances require more than their electrical rating for
startup. When an electric motor is started, the overload indicator (red)
may come ON. This is normal if the overload indicator (red) goes OFF
within 4 seconds. If the overload indicator (red) stays ON, consult your
generator dealer.
During parallel operation, the Eco Throttle switch should be in the
same position on both generators.
1. Connect the parallel operation cable between the EU2200i to either
an EU2200i Companion or another EU2200i generator following the
instructions supplied with the cable kit.
2. Start the engines (see page 25) and make sure the output indicator
(green) on each generator comes ON (see page 30).
PARALLEL OPTION CABLES KIT
(EU2200i and EU2200i Companion)
31Z446020.book 33 ページ 2019年2月8日 金曜日 午前9時37分