manualshive.com logo in svg

Honda ER2500CX, Owner'S Manual

Share
Download
Honda ER2500CX Owner'S Manual Download Page 49

47

STORAGE

d. Remove the sediment cup, and then turn the fuel valve lever to the 

ON position and drain the fuel from the fuel tank. 

e. After all the fuel has drained into the container, tighten the drain 

bolt securely.

f. Reinstall a new O-ring and sediment cup, and tighten the sediment 

cup securely.

g. Turn the fuel valve lever to the OFF position.

2.Change the engine oil (see page 36).

3.Remove the spark plug (see page 43).

4.Pour a teaspoon (5 cm

3

) of clean engine oil into the cylinder.

5.Pull the starter grip several times to distribute the oil in the cylinder.

6.Reinstall the spark plug.

7.Slowly pull the starter grip until resistance is felt. At this point, the 

piston is coming up on its compression stroke and both the intake 

and exhaust valves are closed. Storing the engine in this position will 

help to protect it from internal corrosion. Return the starter grip 

gently.

SEDIMENT CUP

O-RING (Replace)

4MZ416010_Eng.book  47 ページ  ２０１４年９月１０日　水曜日　午後２時３１分

Summary of Contents for ER2500CX





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands