Honda EB11000, Owner'S Manual

Page: 36 / 71

34
Manual starting
Turn the engine switch to the ON position.
Make sure the Auto Throttle switch is in the OFF position, or more
time will be required for warm up.
Turn the fuel valve lever to the ON position.
Make sure that the AC circuit breaker is in the OFF position. The
generator may be hard to start if a load is connected.
Perform the PRE-OPERATION CHECK (see page ).
If you wish to use the Auto Throttle system, turn the Auto Throttle
switch to the ON position after the engine has warmed up for 2 or 3
minutes.
Push the choke knob to the OPEN position as the engine warms up.
Do not allow the starter grip to snap back against the engine. Return it
gently to prevent damage to the starter or housing.
Pull the choke knob to the CLOSED position.
(with a cold and warm engine)
Pull the recoil starter grip slowly until the resistance is felt, and then
pull briskly.
1.
2.
3.
4.
5.
7.
8.
6.
9.
28
08/02/29 15:21:07 31Z08610_035