OPERATION
59
AC OPERATION
If an appliance begins to operate abnormally, becomes sluggish, or stops
suddenly, turn it off immediately. Disconnect the appliance, and determine
whether the problem is in the appliance or the rated load capacity of the
generator has been exceeded.
Substantial overloading may damage the generator. Marginal overloading may
shorten the service life of the generator.
1. Start the engine (see page 47).
2. Switch ON the AC circuit breaker.
3. Plug in the appliance.
4. Most motorized appliances require more than their rated wattage for startup.
5. Turn on the appliance.
Do not exceed the current limit specified for any of the receptacles.
If an overloaded circuit causes the AC circuit breaker or AC circuit protector to
switch OFF, reduce the electrical load on the circuit, wait a few minutes and
then reset the AC circuit breaker or AC circuit protector.
ON
AC CIRCUIT BREAKER
31Z266200.book 59 ページ ２０２０年２月２０日 木曜日 午前１１時１２分
