TIME DISPLAY/SETTING
Displaying the time ................ [11]
Press button [11] and the time is
displayed.
To cancel the display, press button
[11] again.
In the initial setting, the time is
displayed.
Setting the Hours ..... [11]
[12]
While pressing the [11] button, press
button [12] 1 to set the hour.
Setting the Minutes
.................................... [11] [12]
While pressing button [11], press
button [12] 2 to set the minute. When
you release button [11], the second
count begins from 00 seconds.
Synchronizing with the time
announcement ......... [11]
[12]
While pressing button [11], press
button [12] 3 to reset the minute and
second indications to zero.
Example: When synchronizing
between 11:30 and 12:29.
SWITCHING BETWEEN 12 HOUR
AND 24 HOUR TIME DISPLAYS
.................................... [12] [15]
1. Press button [15] for 2 seconds or
longer to select the function setting
mode.
2. Each time you press button [12] 5,
the display changes as shown
below.
12H (12 hour indications)
24H (24 hour indications)
OFF (No clock display)
OTHER FUNCTION
Illumination
The radio illumination is linked to the
car light switch, and the button area
lights up when the car lights are
turned on.
Advice
• [2] lights when a CD is loaded.
Advice
• If you do not perform an operation
within 5 seconds of selecting the
function setting mode, the
function setting mode is canceled.
• You can also cancel the function
setting mode by pressing button
[15].
• Even if power to this unit is
switched OFF, time indications
continue to be displayed unless
switched OFF.
2
Advice
• If the time is not adjusted, time
indications continue flashing.
Advice
• When a two-speaker system is
used, you should set “FAD C”.
ENGLISH
FRANÇAIS
DEUTSCH
ITALIANO
7
