RIGHT REAR
LEFT REAR
(1) adjuster
(2) brake rod
(3) brake arm
(4)
(4)
(5)
(3)
(1)
(2)
(4) adjusting nut
(5) rear axle nut
(6) rear axle shaft
(6)
92
Rear Wheel Removal
Wheels
Servicing Your Honda
Removal
Raise the rear wheel off the ground by
placing a maintenance stand or support block
under the engine. Secure the front of the
motorcycle with tie-down straps.
Unscrew the rear brake adjuster ( ). Press
the rear brake pedal and disconnect the brake
rod ( ) from the brake arm ( ).
Loosen the adjusting nut ( ) on the chain
adjuster on both sides.
Unscrew the rear axle nut ( ). Pull the rear
axle shaft ( ) out. Push the wheel forward
and derail the drive chain from the rear
sprocket. Remove the wheel.
Take care to prevent getting grease, oil, or
dirt on the brake shoe surfaces. This can
cause poor brake performance or rapid brake
shoe wear after reassembly.
1.
2.
3.
4.
2
1
3
4
5
6
０８／０３／１９ １０：１９：５５ ３１ＧＣＦ７２０ ０１０１
