Suspension
(cont’d)
Servicing Your Honda
105
17. With the front brake applied, pump the fork up
and down several times to seat the axle and
check front brake operation.
18. While keeping the forks parallel, alternately
tighten the right axle pinch bolts (36) to the
specified torque:
15 lbf·ft (20 N·m, 2.0 kgf·m)
To avoid damage when torquing the axle pinch
bolts, be sure the axle is seated firmly onto the left
fork leg clamp inner surface.
19. Install the disc cover (37) and tighten the disc
cover socket bolts (38) to the specified torque:
10 lbf·ft (13 N·m, 1.3 kgf·m)
20. Turn the compression damping (39) and
rebound damping (40) adjuster screws back to
their original settings.
Refer to
Front Suspension Damping
1. Remove the front suspension (page 98).
2. Disassemble the fork outer tube (page 100).
3. Place the lower end (axle holder) (1) of the
slider in a vise with a piece of wood or soft
jaws to avoid damage.
Over-tightening the vise can damage the axle
holder.
4. Loosen the fork center bolt (2).
5. Pull up the fork outer tube slowly and
temporarily tighten the fork damper assembly
(page 101). Push the outer tube until the fork
center bolt lock nut (3) is fully exposed and
install the piston base (4) or mechanic’s
stopper tool between the axle holder (1) and
fork center bolt lock nut.
• Piston base
07958-2500001
(36) right axle pinch bolts
(36)
(37) disc cover
(38) disc cover socket bolts
(39) compression damping adjuster
(40) rebound damping adjuster
(37)
(38)
(39)
(40
Fork Damper Disassembly
(1) axle holder
(2) fork center bolt
(1)
(2)
Summary of Contents for CRF450R 2020
