Honda CRF250RL 2017 Owner'S Manual Download Page 68

Page: 68 / 137

Install a new oil filter with the “OUT-SIDE”

mark facing out.

Install the spring into the oil filter cover,

and then install a new gasket and oil filter

cover by tightening the oil filter cover

bolts.

Torque:

7 lbf·ft (10 N·m, 1.0 kgf·m)

10.

Install a new sealing washer onto the

drain bolt. Tighten the drain bolt.

Torque:

18 lbf·ft (24 N·m, 2.4 kgf·m)

11.

Fill the crankcase with the recommended oil

(

P. 48,

P. 129) and install the oil fill cap.

Required oil

When changing oil & engine oil

filter:

1.6 US qt (1.5 L)

When changing oil only:

1.5 US qt (1.4 L)

12.

Check the oil level.

P. 63

13.

Check that there are no oil leaks.

14.

Install the under cowl.

P. 57

NOTICE

Improper installation of the oil filter can result in

serious damage to the engine.

20161109162608_31KZZC000_enu_BOOK Page 69 Wednesday, November 09 2016 16:29:40 JST

Engine Oil

Changing Engine Oil & Filter

Maintenance

Spring

Oil filter cover bolts

Oil filter

Gasket

“OUT-SIDE” mark

Oil filter cover

Summary of Contents for CRF250RL 2017










































































































































Search results

Summary of Contents for CRF250RL 2017

Reviews:

Related manuals for CRF250RL 2017

Brands by name

Popular brands

Honda CRF250RL 2017, Owner'S Manual

Search results

Summary of Contents for CRF250RL 2017

Reviews:

Related manuals for CRF250RL 2017

Brands by name

Popular brands