HRC-Launch Control System
The HRC-Launch Control System reduces slip
and assists for an effective start by
temporarily decreasing the rev limit when
starting.
You can select the rev limit level while the
system is operating according to your skill
and track conditions.
#
To change the level
a
Start the engine and wait more than 2
seconds.
b
Close the throttle completely, press and
hold the start button while pulling the clutch
lever in until the launch control system
indicator blinks (purple).
u
The system goes into standby, and the
launch control system indicator indicates
the selected level by blinking (purple).
u
From standby, the control to decrease
the rev limit starts.
u
The system may become disabled if you
snap the throttle excessively.
u
If the idle speed is low, the system may
not go into standby. Set the idle speed
to standard rpm.
u
To disable the system, quickly press the
start button. The launch control system
indicator stops blinking.
Operation Guide
19
Continued
Start button
Launch control system indicator
(purple)
